Home » Tools
 Checkout
TL110 Clutch Holding Tool
Clutch Basket Tool
Holds clutch baskets, flywheels, gears, sprockets etc.
Jaws open 5"
Very useful tool for any ATV or Motorcycle mechanic.
Price: $26.95
TL1101 Honda Clutch Puller Tool
Honda Clutch Puller
Fits:
TRX250/350/400/450/500/650/680
Price: $70.29
TL1102 Honda 60mm Pinion Tool
Honda 60mm Pinion Tool.
Fits:
Early ATC/TRX250/300/350
Price: $79.95
TL1103 Honda 64mm Pinion Tool
Honda 60mm Pinion Tool.
Fits:
Late TRX250/350/400/420/500/650/680
Price: $87.95
Out of Stock
TL115 Cable Luber
Allows lubricant to be injected into cable housing.
No need to remove cable from machine.
Inject lubricant into housing until it is expelled from the other end.
Single bolt design to ensure even contact on cable.
Price: $7.95
TL119 Deluxe CV Boot Banding Tool
Makes easy work of tightening CV Boot bands.
Racheting handle tightens clamps and cutter trims off extra clamp.
Instructions included.
Price: $34.76
TL119A Basic Banding Tool
Econo CV Boot Banding Tool
Helps facilitate tightning those pesky CV Boot bands.
Includes instructions.
Price: $25.95
TL126 ATV Ball Joint Seperator
Ball-Joint Seperation Tool is designed to separate the knuckle-ball joints. Will not damage A-arm, ball joint stud or rubber boots. Includes two press bolts.
Fits Honda TRX250X / 300X and Yamaha Banshee and Warrior.
Includes instructions.
Price: $20.50
TL142 Ratcheting Plug Wrench
Designed to fit where there is limited space. Fits many watercooled ATV's and Motorcycles.
Internal ratchet mechanism.
Fits standard 13/16" plugs.
Price: $16.95
TL176 Honda Axle Nut Wrenches
Specially designed for removal of Honda ATV axle nuts.
Made from heat-treated steel with a 1/2"-drive slot for use with a torque wrench or ratchet wrench.
41mm (Honda)
08-0237
Price: $50.58
TL189 Hydraulic Brake Bleeder
Allows you to bleed your brakes by yourself.
One way valve prevents backflow.
Includes Instructions
Made in the U.S.A
Price: $15.95
TL300 Drive Converter/Primary Clutch Puller
Drive Converter and Primary Clutch Puller.
Fits Kawasaki Prairie (all) 700 V Force, 650/750 Brute Force (all) Kawasaki Mule.
Suzuki 700 Twin Peaks 04-06
Arctic Cat 650 V2 04-06.
Replaces Kawasaki OE 57001-1429
Price: $29.95
TL301 Kawasaki Pinion Tool
Kawasaki Pinion Tool
Fits:
KVF360/650/700/750
Price: $95.95
XAG100 Low Pressure Air Gauge
Armor Tech Low Pressure Air Gauge 0 - 20 lb range
Price: $5.95
XFP100 Flywheel Puller
27mm X 1.0mm Left Hand Thread Flywheel Puller.
Flywheel should have internal threads.
Fits:
Honda CR80/ 125R/ 250R/ 450R /480R /500R
Honda XL80 /100 /170
Honda XR100, ATC70/110 (CDI Only)
Honda TRX70 /125 /200 /250

Kawasaki KD80, KX80, KDX80, KS100 /125 & Most early point type ignition flywheels.

Suzuki LT50 /125 /160 /250R /500R
Suzuki ALT185, DR100 /125 /250
Suzuki DS80, JR50 /70 /80 /90 /100

Yamaha PW50, RZ350, IT350 /500, XT500/600, YFM80 /100 /200 /225
Yamaha YFS200, YFZ350, YSR50, YT125 /175 & Most single cylinder off road enduro and motocross models.
Price: $22.95
XFP101 Honda Flywheel Puller
22mm X 1.5mm Right Hand Thread Flywheel Puller.
Fits:
Honda FT/GB500, NT/NX650, LT250, VF500C/700C 84-86, VF700F/S, VF750C 82-83, VF750F/S, VF1000F/R, VF1100CS, VFR700/750F 1986, VT500C/FT, VT600C/CD 88-89, 91-96, VT600C 97-02, XL250, XL350, XL500, XL600, XR500, XR600, XR650L

Kawasaki KLR600A 84-86, KLR650 96 up.
Price: $14.95
XFP102 Flywheel Puller
16mm X 1.5mm Right Hand Thread Flywheel Puller.
Flywheel should have internal threads.
Fits:
Honda ATC90/110 w/breaker points.
CT90, CB175, Early CR125M /250M Elsinore, SL175 /350

Kawasaki KLT110/200, KLF300 86-87, KX125 /250 /420 /500 Pre 1981

Suzuki GS550 /650 /750 Early 1100's and most 4 stroke street bikes

Yamaha FZ600, FZR600 /750 /1100
Yamaha TT225, XJ550 /650 /700 /750 /900
Yamaha FJ600 /750 /1000
Price: $14.95
XFP103 Flywheel Puller
20mm X 1.5mm Right Hand Thread Flywheel Puller.
Flywheel should have internal threads.
Fits:
Honda CB750, Most 250R
Honda XR600R

Kawasaki KLR250, KLR600 /650
Price: $13.95
XFP104 Honda Flywheel Puller
20mm X 1.5mm Hollow Right Hand Thread Flywheel Puller.
Fits:
Honda Honda TRX300/300FW
Honda ATC2050ES/SX/350X
Honda CB400/450
Honda CM450, CX/GL 500/650
Honda TRX250, MR250, NX250, PC800
Honda VT700/750/800/1100
Honda TRX450S/ES
Price: $15.95
XFP105 Flywheel Puller
18mm X 1.5mm Right Hand Thread Flywheel Puller.
Flywheel should have internal threads.
Fits:
Kawasaki KLF300B,C
Price: $15.95
XFP106 Kawasaki Flywheel Puller
Right hand threads.
35mm x 1.5mm external thread flywheel.
Fits:
Kawasaki KLT160, KLT185, KLF300, KSF250, many 4-Stroke ATVs with large flywheel.
*Note: this puller only has a pulling depth of 1" for a deeper pull use XFP110
Price: $29.95
XFP107 Kawasaki/Suzuki Flywheel Puller KLF300 & LT60/230/250
30mm x 1.5mm Right Hand Thread Flywheel Puller.
Use on external thread flywheels.
Fits:
Kawasaki KLF300 various years
Bayou 220/250 97-06
Suzuki LT60/230/250
Price: $57.95
XFP108 Honda Flywheel Puller
14mm X 1.5mm Internal Thread Flywheel Puller.
Fits:
Honda ATC200E, ATC200X
Price: $12.95
XFP109 Flywheel Puller
30mm X 1.5mm External Right Hand Threads Puller.
Shallow depth.
Fits:
Suzuki:
LT160 03-04, LT230E 87-93, TM125 73-75, TM250 72-75, TM400 71-75 and others.
USE FP107 for Deeper Pull.
Price: $39.95
XFP110 35mm x 1.5 RH Flywheel Puller
35mm x 1.5mm Right Hand EXTERNAL Thread Flywheel Puller. 3" Pulling Depth.
Use on Flywheels with external threads.
Fits:
Suzuki LT250, LT300, Some Kawasaki.
Price: $26.95
XFP111 Flywheel Puller
6 Hole Disk with 6mm and 8mm puller bolts.
Fits:
Yamaha YFM200DX, YFM250
Price: $39.95
XFP112 38mm x 1.5 Flywheel Puller
38mm x 1.5mm EXTERNAL Thread Flywheel Puller. 4" Pulling Depth.
Use on Flywheels with external threads.
Fits:
Suzuki LT Series ATVs
Price: $69.95
XFP113 28mm x 1.0 RH Flywheel Puller
28mm x 1.0mm Right Hand Internal Thread Flywheel Puller.
Includes Shaft Protector cap
Fits:
Honda TRX450 R
Price: $34.95
XFP201 Flywheel Puller
30mm x 1.0mm Right Hand EXTERNAL Thread Flywheel Puller. 2 7/8" Pulling Depth.
Fits:
Yamaha WR250F 03-07
Yamaha WR450F 03
Price: $34.95
XFP405 50mm x 1.5 Flywheel Puller
50mm x 1.5mm Internal Thread Flywheel Puller.
Use on Flywheels with external threads.
Fits:
Suzuki LTA 500F 00-07
LTF500F 98-07
LT80 04-06
LTZ90 07
LTF400F 02-07
LTA400F 02-07
LTF400 04-04
LTA400 02-04
Price: $59.95


home ] products ] search ] cart ] about us ]

Copyright Kayden Enterprises, Inc.. 2003-2016, All rights reserved.


Universal ATV CV Boot.
ATV Lightning-Boot CV Boot
Replace that damaged or worn out CV Boot. Fits most ATV's
 
Only $22.95

Honda Steering
Bushing

 Honda TRX Steering Bushing
Only $22.95

Honda/Yamaha Starter Solenoid. ATV Starter Solenoid
Fits Many Models
Only $36.95

Yamaha Intake Manifold
Yamaha ATV Intake Manifold
Fits Big Bear, Kodiak and Moto 4
Only $49.95